QuestionQUESTION: Do you know where I can download a workshop manual for this? I need to remove the carb and replace with new one.
ANSWER: Hello K:
>>You can View a Breakdown/Schematic of this Unit at this Site Addy; http://www.dixiemarinesaleshonda.com/pages/parts/viewbybrand/default.aspx or Call them @ 888-524-7195. Fill out the "Select Part Diagrams by Model Fit" Window. Now you can View a Breakdown/Diagram of this Unit.
>>You will Need the Model Numbers Off the Unit to Fill Out the Window Correctly.
>>If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: Thanks for the link, it is very helpful!
I also have to flush out the outboard. It was started in a dirty farm trough and was pumping water but then stopped. I suspect it may be blocked with debris. What is the correct way to unblock?
ANSWER: Hello Again K:
>>Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you.
>>Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: honda 2hp 4 stroke # BAEE 1106025
AnswerHello Again K:
>>The Model Numbers should be Similar to the Following; BK75K1, BF100, and ext.
>>The Numbers you Sent me are the Serial Numbers. They are also Required to Locate the Correct Manual and Parts.
>>Thanks.
>>Respectfully
John
PS: Don't Worry, this happens a Lot when working on Small Engines. They make Design Changes so often that I like to See the Units Breakdown if Possible before I Supply an Answer that might Cost them an Engine or more Repairs.
Thanks again,
John
