QuestionI have a John Deer AMT 626 that runs fine until I shut it off, then it will not restart (no Spark)until it cools, then it starts and runs fine until I turn it off. I have done the following:
Replace Coil and set gap, checked all electrical connections, pulled flywheel and cleaned, checked for spark while hot. none), set valves gap, changed spark plug. After reading as many questions as I can find close to this problem I am wondering if the ignitor could be causing this? I would like to be sure before buying one. Can heat from the engine stop the ignitor from functioning? Thanks in Advance.
AnswerIf you have no spark when hot, then the valve adjust did nothing.
The only other variables are the flywheel, coil, and "ignitor",
the flywheel has only magnets., and you have replaced the coil.
I do not work on many Kawasakis, but that may be the only thing left.
Tell me again, from square one, what is the problem....
