Small Engines (Lawn Mowers, etc.): Steer Shaft Removal, shaft removal, phillips head

Question
I have a Troy-Bilt Pony, model # 13AN779G766, 42" cut, 7 speed lawn tractor with a B&S 17.5 hp motor. I am trying to replace the shaft with a new one, but can't seem to loosen the phillips head screw at the end of it under the mower.  WD-40 hasn't worked and the area is too small turn with the tap of a hammer.  any suggestions...thanks.

Answer
Hello Doyle:

>>Sometimes Heat is Required to Loosen and Remove this Screw.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John