Small Engines (Lawn Mowers, etc.): carb mixture adj., full throttle, screws

Question
Husqvarna 444se chain saw.  I need to know the initial starting adj. for both hi and lo mix. adj screws, ie; i-1/2
turns ccw, etc.  Thanks, Jim

Answer
Jim
The norm for starting the adjustments on most equipment is to take the High speed close it (don't bottom it out hard)  then open it 3 Half turns open the same for the low Idle. Start the saw and adjust the low one first do it either way till the saw runs smooth. Then run the saw at full throttle and adjust that till it runs smooth.You wont get it to run perfect as this is a 2 cycle engine and there not made like a pro saw.All turns closed are CW and CCW to open