QuestionI need to replace a shear pin on my Simplicity (10hp). When I turn the augur, I just can't find either the old broken pin or the hole where the replacement pin is supposed to go. Any tricks?
AnswerHello Walt:
>>You can View a Breakdown of the Unit at this Site Addy, http://www.jackssmallengines.net/parts.asp and Select Shop Online Parts Look Up. Then Select the Model Tab and Enter the OEM and the Model Numbers. Now Double Click on your Model in the Results Area.
>>Usually if you cannot Locate the Hole in the Gear Box, then the Auger has to be Removed from the Auger Housing. Once the Auger and Gearbox are Out of the Auger Housing, you can then Locate the Hole in the Gearbox Short Shaft and then Replace the Sheared Bolt.
>>Please, Do Not Hesitate, If you Hit a Snag, if I Missed Something or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
