Small Engines (Lawn Mowers, etc.): McCulloch Chain Saw 3216, david answer, torch tip

Question
QUESTION: I replaced rotten fuel lines, but am now having a problem remembering how the assembly of the trigger and the regulator of speed attached to the carburetor are hooked together.  Can you help me, please.  David

ANSWER: Hello David:

A Breakdown will Show you How the Trigger and Associated Components are Assemblied. You can View a Breakdown of this Unit at this Site Addy;
http://www.ordertree.com/cms/parts-lookup-help/73.html and Select the OEM (McCullough) and Enter the Model Number 3216 and Click Go. Select your Model form the List Provided. If No Results, then Select the Click Here for Help. Now Scroll through the Units Listed and Locate your Model. Then Select your Model and View the Breakdown/IPL. Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John

---------- FOLLOW-UP ----------

QUESTION: Thank you, I have replaced thefuel and oil lines, and the saw is running again.  One final problem for consideration, the oil to the chain is not coming out.  It indicates that at the base is where the oil supposedly comes out and maybe plugged.  I cannot identify this hole that maybe plugged.  Imagery is poor but am not getting any oil from the reservoir on to the pump chain.

Answer
Hello Again David:

Remove the Bar and Look for a Brass or Steel Insert Near where the Top Center of the Bar would be when the Bar is Mounted. Use a Straignt Pin or a Torch Tip Cleaner Set and Clean out this Hole. If this Does Not Clear Up the Oiling Problem, then the Oiler May have to be Removed from the Saw and Placed into Oil and Primed or the Oile Pump May Require Replacing. Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John