Small Engines (Lawn Mowers, etc.): Cable & vent hose routing diagram Polaris ATV, vent hose, wire harness

Question
My 2001 Polaris Magnum 325 throttle and choke cables keep catching. Could you tell me proper routing for these cables and the vent hoses as well? Thank you!

Answer
Hello Tawnia:

The Cables and Wire Harness are Routed from the Handles to the Center of the ATV and then Run on Either Side of the Frame and should have Enough Free Play to Move with the Handle Assembly when it is Turned. What are the Cables Catching on? Are the Cables the Original Ones or are they New Cables? Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John