Small Engines (Lawn Mowers, etc.): B&S Starter R&R, starter clutch, correct tools

Question
This is a Briggs 10.0 HP 19G400 series (19G432 Type 1182 E1) on a Sears Chipper. The pull starter was working fine, then next start the rope pulls out fine, rewinds fine, no resistance or sound. Does that indicate a specific problem? I found a parts diagram on line, but not a remove/replace instruction.

Web searches found some ideas for various engines, but none that looked like this engine and few troubleshooting options without removing the assembly - and this one looks too different from the lawnmowers I've worked on.

Thanks for any suggestions.

Answer
Stan,

   you need a new Starter-Clutch take it to your local small engine shop they have the correct tools to remove and replace it in 10 mins total time
cost should not be more the $40
+ Part
here is the PDF downloadable Manual for your specific engine with all your required part numbers at the bottom
http://www.briggsandstratton.com/maint_repair/manual_and_more/docsearch.aspx?mod...

LOOK AT PAGE 5 ASSY #66
Thats a Starter-Clutch in an exploded view
B&S PN#399671
I hope this does help you drastically because B&S puts this out for owners of specific engines to have on hand in case these lil things happen