Small Engines (Lawn Mowers, etc.): Husky Tractor, oem id, example model

Question
QUESTION: John,
The OEM ID Plate was slightly damaged. So here is all the info I could read
8237t2248
???0500
Hydrogear
Sullivan IL

Thanks again.

ANSWER: Hello Christopher:

Can you Locate the Mowers Model Numbers, Please. The Numbers Missing from the Hydro Plate are Required and I May be Able to Locate the Complete Model Numbers from the Mowers Model Numbers. The LTH130 is the Series Model. Example Model Number: 13AN698G033. Please try to Use the Follow Up Feature. This Feature will See to it that All our Communications are Relayed to me for Review. Thanks.

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John

---------- FOLLOW-UP ----------

QUESTION: serial 041599d001803
mtf Id num 954140005k
product no 954-14-00-05


ANSWER: Hello Again Christopher:

Sorry for the Delay. I have been in Contact with MTD about the Model Numbers for this Unit. I cannot Locate these Model Numbers in the Microfiche or Online. My Contact Failed to Remind me that it May take them up to 72 hrs to Call me Back with Any Information. Please Remind me of this Question on the 3rd or Monday the 7th of July. I Should have a Response by the 3rd, but with the Holiday, I cannot Guarantee one. I hate to have you Do the Wrong Thing and have More of a Problem than you do Now. If I can See a Breakdown of the Transaxle, I can Better Instruct you. Thanks for being Patient.

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John

---------- FOLLOW-UP ----------

QUESTION: john,
Just wanted to follow up and see if you have any more information

Answer
Hello Christopher:

I was Told the Model Numbers were Incorrect and Could Not be Located. However, if the Hydro has a Reservoir, then Fill the Transaxle to the Full Mark. If No Reservoir, then Locate the Fill Plug and Add 1/2 Qt at a Time (up to 2 Qts) and See if this Corrects the Problem. The Transale Must Run Cool or the Oil Thins too Much and you have the Problem you Described. Are All the Fins on the Cooling Fan? Is the Hydro Clean so it can be Cooled Properly by the Cooling Fan? If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John