Small Engines (Lawn Mowers, etc.): B&S 28A707 0122-02 Engine problem, snag, snapper

Question
I just purchased a used Snapper last week and it mowed wonderfully. This week I was half through and ran out of gas. I filled it up and then it started sputtering after a while and I noticed gas dripping out at a pretty good rate.  

I got the model number B&S 28A707 Type 0122-02 Code 960328ZB, and looking on the manual can see that it is leaking from the Bowl Float (part # 495933) at the bottom.
I guess the screw and washer 281164 & 94642 have fallen out.

What is involved in repairing this? Is it just purchasing those two parts and screwing them in or is there some special adjustment required?

Thanks you may Jesus bless you!

Shane

Answer
Hello Shane:

It is Unusual for the Bowl Screw to Loosen and Fall Out. However, if this has Happened, then Purchase a New Bolt and Washer and Simply Screw the Bolt in and Tighten. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John