Small Engines (Lawn Mowers, etc.): Pressure Washer, spec numbers, change oil

Question
I can't pull the starter.  The cord too tied, starter not turn, seem like clogged.  Can you show me how to make the starter turn again.  I did remove the spark plug, change oil.  Thank you.

Answer
Hello Victor:

Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you or Send me the Model and Type or Spec Numbers Off the Engine, Please. With these I can Locate the Proper Manual and Better Assist you. The Model Numbers May be Stamped Into the Blower Housing (metal engine cover) Above the Spark Plug. Does the Starter Turn with the Engines Plug/s Out? Remove the Blower Housing (metal engine cover) and Try to Turn the Engine  by Hand. Does it Turn? If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John