Small Engines (Lawn Mowers, etc.): Engine want turn over, twin cylinder engines, sears craftsman

Question
I have a Sears Craftsman 18 HP Auto Transmission, Briggs & Straton.  It will not start anymore.  Want even turn over the engine.  It makes a clicking sound.  I checked the battery it good.  I changed the ignition switch.  Still want turn over.  Could it be the solenoid or Starter or something else? Thanks

Answer
Hello Jimmy:

It May be the Valves Require Setting. First Lets Check the Starter and Solenoid. ** (with the Spark Plug/s Removed) To Check the Solenoid and Starter, Once you are Sure the Battery is Fully Charged/New, then Use your Jumper Cable Set and Attach the Positive Lead Onto the Positive Post of the Battery (make sure the Battery is Fully Charged or is a New Battery). Now Firmly Touch the Large Post on the Starter. If the Starter Does Not Turn and you can turn the Engine by Hand, then the Starter is Bad. If the Starter Turns the Engine Properly, Then Check the Solenoid. Firmly Touch the Small Post at the Base of the Solenoid that has the Ign Wire Attached to it. If The Starter Does Not Turn and the Solenoid Clicks, Then the Solenoid is Bad.** If the Starter and Solenoid are Good, then Reset the Valve Clearance. **I Do Not Use the Setting Called for by the OEMs. I have Found that the Following Works Best. Remove the Valve Cover (on the Dead Cylinder for Twin Cylinder Engines). Set the Cylinder you are Setting the Valves on to Top Dead Center (Both Rocker Arms will have Play in them when the Engine is at TDC) When Setting the Valve Clearance. Now Loosen the Valve Adjuster Locks and Set the Intake Valve Clearance to .004in -.006in and the Exhaust to .007in - .009in. I have had Better Performance Out of the Mowers and Less Burnt Valves Using these Settings. Be Sure the Piston is at TDC on the Compression Stroke.**  If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John