Small Engines (Lawn Mowers, etc.): Wiring diagram for JD 110 garden tractor, ariens mower, b battery

Question
I'm looking for a wiring diagram for a 1970's JD 110, specifically how to hook up a new ignition switch.  It does not have a plug, only single wires leading to it.  Any help would be appreciated.

Answer
Hello Larry:

All the Ariens Mower I have Performed Maintenance on had a Plug at the Ign Switch and the Breakdowns of Ariens Equipment Show a Plug. You will have to Use an Ohm Meter an Locate the Destination of Each Wire and then Match it to the Ign Switch Lug. The Ign Switch should be Marked with Letters Stamped Beside Each Lug. Some are Stamped for the Color Code (ie: R = Red, B = Black, G = Green, ect.) and Others are Stamped for the Component (S = Solenoid, C = Charger/Stator, B = Battery, G = Ground, ect.). If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John