Small Engines (Lawn Mowers, etc.): snowblower pulley systems, steel wire brush, pulley systems

Question
I have a Landmark Supreme 10/30 snowblower model # 312941H503 serial #0060959. One of the pulleys has slipped off and I can't quite figure out how it goes back on. Where can I find a diagram of the pulley sustem. When I first put it back together, the auger was running all the time and when I put it in gear the auger stopped running. I tried a different route for the pulley and both worked but the pulley started burning. I know that I will need to steel wire brush and sand the pulleys and need to replace both belts, but I need to know the size of belt(s) and how they fit back on the pulleys, especially the auger belt. Thanks!

Answer
Hello Larry:

Sorry for the Delay. This Question was Located in the Question Pool. From the Model Numbers, this Looks to be a Murray Unit. Can you Send mw a Picture of the Unit, Please. I have Tried Murray and MTD and have Not been Able to Locate Any Information Using these Model Numbers. Thanks.  

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John