Small Engines (Lawn Mowers, etc.): chemical valve repair, chemical discharge, pressure mode

Question
I have a generac 1293-1 pressure washer. Water is leaking
from the chemical discharge wand when the washer is in the pressure mode,(chemical valve closed). This leads me to question the final output pressure. I removed the wand pipe and saw that the valve is a needle and seat. I need to disassemble the chemical valve to repair the needle and seat. I cannot determine how to disassemble the valve. Can you tell me how.
Thanks


Answer
Hello Jonny:

Replacement Parts are Not Offered for these Wands. You can View a Breakdown of the Pressure Washer at this Site Addy; http://www.pressureparts.com/Manuals.aspx and Select the   Logo of the Manufacturer of your Pressure Washer. Then Select the Model of your Pressure Washer. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John