Small Engines (Lawn Mowers, etc.): repair carburetor Honda 11 hp, adjustment screws, carburetor body

Question
When cranking smells like varnish, How hard is it to clean carburetor and/or replace parts
Putting carburetor back together and setting screws

Answer
Hello Keith:

Usually a Breakdown of the Engine and Carburetor is All you Require to have as a Reference to Remove and Clean the Carburetor. If you DO Hit a Snag or Just Require More Detailed Instructions, Do Not Hesitate to Ask, Please. This should Show How the Carburetor is Attached to the Engine. Then Select the Carburetor File to See the Carburetor in Breakdown for Disassembly and Cleaning. **REMEMBER You Do Not have to Remove the Welch Plugs. The Following is the Instructions for Proper Carburetor Cleaning.  Remove, Disassemble and Soak the Carburetor Overnight in Carburetor Cleaner (I Use Gunk). I have Found that Most People can Use a Breakdown/IPL and Disassemble the Carburetor Enough for Proper Cleaning. You Only have to Remove the Bowl, Float Pin, Float and Needle Valve and Any Adjustment Screws that Go Into the Carburetor Body. The Welch Plugs Do Not have to be Removed. Then Soak the Carburetor Body and Parts in a 1 Gallon Can of Gunk Carburetor Cleaner Overnight. The Can has a Parts Tray Inside it for the Small Parts. Once the Carburetor and Parts are in the Cleaner, you can Replace the Lid for Safety and to Prevent Accidental Spillage. Then Blow Out the Passages with Compressed Air. Install New Parts if Required. You can View a Breakdown/IPL of the Mower/Engine at this Site Addy, http://hayward.arinet.com/scripts/EmpartISAPI.dll?MF&app=ASP&lang=EN&TF=Mainfram... and Select the Catalog American Honda. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John