Small Engines (Lawn Mowers, etc.): Snapper RER, 22 series, drive problem, worn clutch, tension spring

Question
According to my "research", it sounds like I have a worn clutch assy.  I have plenty of power, blade drives/cuts fine, but the mower won't move unless it is in 1st or 2nd gear, and has no drive to go up the slightest encline. Does my assessment sound right, and are there any instructions anywhere for disassembly (or is it pretty basic)?

Answer
Hello Dave:

Send me the Model Numbers Off the Mower, Please. With these I can Locate the Proper Manual and Better Assist you. Is the Driven Disc or the Rubber Drive Disc Worn Badly? Is the Tension Spring Intact? If the Driven Disc or Rubber Drive Disc Require Replacement; I can Locate a Breakdown of the Components and it will Assist you in Doing this Repair. I can Also Provide Answers to Any Questions you May have During the Repair Process. If you Hit a Snag or this Does Not Correct the Problem, then I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John