Small Engines (Lawn Mowers, etc.): Homelite weed trimmer wont suck gas, homelite weed trimmer, gasket kit

Question
The problem started when I had to replace the primer bulb and both gas lines. No results. then I installed a new gasket kit.  Still will not suck gas.  Will run only when gasoline is poured directly into the cylinder
Homelite weed trimmer #Z725CDV.
Carburetor WALBRO #43S 4200 WT-363-B5

Answer
Hello Ed:

1- Replace the In Tank Fuel Filter. 2- Remove the Muffler and Inspect the Exhaust Port for Carbon Blocking the Exhaust Port. Check the Muffler and Spark Arrestor Screen (in the muffler) for Blockage Also. 3- You can View a Breakdown/IPL of the Carburetor at this Site Addy, http://69.16.165.8/ and Select Service & Aftermarket. Now Select Aftermarket Parts and Service. Now Select the OEM (Homelite). Now Select Trimmer. Now Select your Carburetor (WT-363-B5) from the List Provided. You can Use the Breakdown to Make Sure you Assembled the Carburetor Properly. 4- Reverse the Fuel Lines to Ensure they are Attached Properly to the Carburetor. If the Fuel Lines are Reversed, it can Not Draw Fuel. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John