Small Engines (Lawn Mowers, etc.): cub cadet not starting, switch jumper, jumper wire

Question
Thank you for your answer. I checked the starter. It is ok. I jump started the mower and noticed the battery was charging at 22v at a high rpm. The amp light was on.I turned the mower off and now it won't turn over or do anything.What do I check next?    Dan

Answer
Hello Dan:

Send me the Model Numbers Off the Mower, Please. With these I can Locate the Proper Manual and Better Assist you. Check the Safety Switches. PLEASE REMEMBER THAT THE INSTRUCTIONS FOR CHECKING THE SAFETY SWITCHES IS JUST THAT!!! FOR CHECKING ONLY. I NEVER Suggest a Mower be Operated with a Safety Device or Switch Disconnected or Bypassed. Now. On Some Model Mowers you can Simply Unplug the Safety Switch from the Harness. On Other Models you have to Place a Jumper Wire Between the Harness Terminals (on the 4 Post Switch Jumper from Same Color Wire to Same Color Wire). Check the Clutch/Break and the Blade/PTO Safety Switches First. Check the Seat Safety Last. Usually the Seat Safety is Not in the System for Starting the Engine. Just to Ensure Someone is in the Seat when Engaging the Transaxle and/or Blades. If Possible, Use the Follow Up SYstem, Please. this Allows me to See All the Conversations we have Had and I can Follow the Diagnostic Steps you have Already Performed. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John