Small Engines (Lawn Mowers, etc.): Engine kills when brake is released, switch jumper, jumper wire

Question
I have a John Deere Sabre Lawn Tractor Model 1542HS with Hydrostatic transmission.  Replaced the battery so engine starts fine, but when I release the brake, the engine kills. What do I need to do to correct the problem?

Answer
Hello Clarence:

PLEASE REMEMBER THAT THE INSTRUCTIONS FOR CHECKING THE SAFETY SWITCHES IS JUST THAT!!! FOR CHECKING ONLY. I NEVER Suggest a Mower be Operated with a Safety Device or Switch Disconnected or Bypassed. Now. On Some Model Mowers you can Simply Unplug the Safety Switch from the Harness. On Other Models you have to Place a Jumper Wire Between the Harness Terminals (on the 4 Post Switch Jumper from Same Color Wire to Same Color Wire). Check the Seat Safety Switch. It is Not Showing Anyone in the Seat when the Clutch is Released and Grounds the Engine. This is Part of the Safety System. You can View a Breakdown/IPL of the Mower at this Site Addy, http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.H... and Enter the Model Numbers and Click Find. Then Select the Sectional File. Then Select the Section of the Mower you Wish to View Online. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John