Small Engines (Lawn Mowers, etc.): gravely 988114, handle bars, kawasaki
Questionhello john i have a gravely 988114 walkbehind 36 inch cut with a kawasaki fh381v motor my wires keep pulling out from under my handles and i have took it in and they have fixed 2 or 3 times one time they even solderd the lines but later they pull out they have made longer but later pull out do u have any ideas what i could do to eliminate this problem.
AnswerHello Andy:
Have the Wires Been Attached to the Handle Bars? Make the Wires Long Enough to Run and be Wire Tied to the Handle Bars. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
- Small Engines (Lawn Mowers, etc.): Lawnmower, hard starting when hot, stratton family, briggs stratton
- Small Engines (Lawn Mowers, etc.): shindaiwa t 20 trimmer, tank fuel, shindaiwa
- Small Engines (Lawn Mowers, etc.): Fuel in Oil, briggs stratton, crankcase