Small Engines (Lawn Mowers, etc.): wiring, kill switch, flywheel

Question
I have replaced the ignition coil,flywheel and plugs.All that is attached in the ignition,solenoid,ignition coil and battery.I have the kill switch unplugged.I cane not get a spark.Can you help?
Thank you
Jack

Answer
If all the components were new, and this engine doesn't have points and condensor, You have to have spark.

When you say you have "no spark", how do you know?  Are you sure you are testing correctly.  It NEVER is the flywheel or solenoid.

To sum it up. If you are testing correctly you probably got a bad coil.  There just isn't anything else.