Small Engines (Lawn Mowers, etc.): snapper wont move, wont move, hay john

Question
hay john this is james again about the snapper that wont move . i found the seral #33137748 modal #280845 to refresh your memory i just put a axel back on my snapper and now it wont move . and my cluch sticks . and were my shifter there is a pin that fits in the frame nothing holds it there just slides in a hole but when i shift the shifter it falls out of the hole .i put it back in the hole whin it was running and tried to shift it but it still diddent move . please help if you can .thanks james

Answer
Hello James:

I am Unable to See how you have Connected the Linkage. If you Download the File #07012 at this Site Addy, http://snapper.com/# and then Select the Publications at the Top of the Page. Then Select the Model Numbers 28084S. Then Download the File. Page 26 of 58 is the Start of the Transmission Repairs Section. It will Guide you through the Diagnostic for the Transmission and Drive Assembly. Hope this Helps. I am here if you Require more Assistance. Let me know what Happens, Please. Thanks.

Good Luck

Respectfully

John