Small Engines (Lawn Mowers, etc.): Lawnmower Brake Cable Replacement, lever bar, s hook

Question
QUESTION: Firstly my wife says I shouldn't try to repair anything myself and she's in all likelihood the smarter of the two of us. My Mastercraft lawnmower has a throttle adjustment mechanism and brake cable both running into it.  I replaced the throttle cable successfully (much to her surprise) but broke the brake cable "S" snap while in teh process (no surprise to her on this one).  I bought a replacement Brake cable (which matches identically (legnth etc) to the old one but I can't seem to get the throttle/brake box in the correct setting to allow the "s" clip to fit in the handle allowing the handle to adjust teh brake off and on.  

Not many options but I just can't seem to get the darn thing back to allow my wife to resume cutting our grass (just kidding here of course). Any suggestions would be like gold.

Kind Regards,

Dan K
ANSWER: Hello Dan:

If you Send me the Model Numbers Off the Mower, I can Locate a Breakdown/IPL for you to View Online that Should Simplify the Matter for you. Thanks.

Respectfully

John

---------- FOLLOW-UP ----------

QUESTION: John, the Model # is 115-413A515 and the Mfg Code is
1C07512-0580.

Thx for any help you can offer.

Dan

Answer
Hello Dan:

Squeese the Brake Handle/Bar and Remove it from the Handle Assembly. Connect the S Hook and Reinstall the Brake Lever/Bar on the Handle. Hope this Helps. I am here if you Require more Assistance. Let me know what Happens, Please. Thanks.

Good Luck

Respectfully

John