Small Engines (Lawn Mowers, etc.): Honda GC 160 GC190 engine, spark plug wire, honda engines

Question
I have a power washer with the Honda engine mentioned in the subject section.  It will start and run for awhile and then stop.  After cooling down it will start again.  The repair people have told me it is the coil.  My problem it is four weeks before they can fix it.  It is a $30 dollar part.  I want to know how hard it is to replace it and how do I do it if it is simple.  Where do I find instructions on this subject?

Answer
 Hello Brent:

 Remove the Blower Housing(metal engine cover) and the Coil is the Component that is Set at .020in from the Flywheel. The Spark Plug Wire comes Out of the Coil. Remove the 2 Screws and Replace the Coil. Then Replace the Blower Housing. You can View a Breakdown/IPL at this Addy http://www.honda-engines-eu.com/en/service/spareparts/heepartscatalogue/index.js... Hope this Helps. I am here if you Require more Assistance. Thanks.

 Good Luck

 Respectfully

 John