Small Engines (Lawn Mowers, etc.): Murray riding mower wont turn over, soleniod, safety switch

Question
Model# 38710X99A
-------------------------

Followup To

Question -
2000 Murray 13hp 38" riding mower w/ Tecumseh Enduro engine.

The mower won't turn over.  There is no solenoid click and it has a new battery.  Prior to not starting at all, I did encounter a couple of times when it did nothing for a few turns of the key and then it finally did start. However this time nothing and has been sitting for a while.

Answer -
 Hello Rob:

 Send me the Model Numbers Off of the Mower, Please. With these Numbers I can Locate a Breakdown/IPL of the Mower and Beter Assist you. Some of the Mower have a Relaythat will Cause this Problem. It May be a Bad Soleniod. The Model Numbers will Help. Thanks.

 Respectfully

 John

Answer
 Hello Rob:

 Check the Fuse. Check the Seat Safety Switch. Check the Clutch Safety Switch. Check the Starter Soleniod and the Ignition Switch. You can View a Breakdown/IPL of this Mower at this Addy http://www.smallenginepartswarehouse.com/parts.asp and Click Parts Look Up. Then Select the OEM(Murray) and Enter the Model Number and Click Search. Then Double Click on the Model Number in the Search Results Area. This will Open a New Window to View the Breakdown/IPL. Hope this Helps. I am here if you Require more Assistance. Let me know what Happens, Please. Thanks.

 Good Luck

 Respectfully

 John