Small Engines (Lawn Mowers, etc.): exchangeing the float needle, needle point, model numbers
QuestionI need to replace the float needle but have never attempted this before. What position does the needle point end face? up or down?
Thank you
Answer Hello Ken:
The Needle goes into the Carburator Housing and the Flat rests on the Float. Send me the Model Numbers Off of the Engine and I can get you a Breakdown of the Carburator and this will Assist you in Doing this Repair. Hope this Helps. Let me know what Happens, Please. Thanks.
Good Luck
Respectfully
John
- Small Engines (Lawn Mowers, etc.): craftsman 6.5 hp lawnmower, carburetor body, adjustment screws
- Small Engines (Lawn Mowers, etc.): 318 john deere tractor rear release, john deere tractor, 318 john deere
- Small Engines (Lawn Mowers, etc.): Poulan chainsaw starts, but wont run?, exhaust port, carbon deposits