Small Engines (Lawn Mowers, etc.): wirring for briggs 15.5hp, soleniod, qoil

Question
The model # is T60   12v  and the serial # is Z6B192.  
-------------------------

Followup To

Question -
i need to know how the starter qoil is wired for a 15.5hp briggs i/c platinum motor. it is going on a 60" swisher finish mower

Answer -
 Hello Buddy:

 Send me the Model Numbers Off of the Mower, Please. I would like to look up the Diagram of this Mower to Better Assist you. Thanks.

 Respectfully

 John

Answer
 Hello Buddy:

 On the Blower Housing(meteal Engine Cover) there should be Model Numbers(5digits) and Type Numbers and Code Numbers. These are the Numbers I require. However After Thinking about your Question and to Try and Save Time I will Try this Answer. The Starter is Wired with a Large Battery Wire from the Soleniod. The Soleniod is Wired to the Ignition Switch that the Wire to the Soleniod is Hot Only when you Turn the Ignition Switch to the Start Position. Hope this Helps. Let me know what Happens, Please.

 Good Luck

 Respectfully

 John