Small Engines (Lawn Mowers, etc.): tecumseh hh60 head bolt torque specs, bolt torque specs, head bolt torque specs

Question
I am rebuilding a tecumseh hh60 engine that threw a rod. I need to know the torque specs for the rod to crank bolts, the head bolts, and the sump bolts.  Also, the head bolt tightening sequence if spec'd.  I was also wondering if I need to apply any grease to the inside of the oil seals (like I do in my car) and, if so, what kind of grease to use (lithium, heavy duty, etc.)
Thanks so much, I know that I'm asking a lot.

Answer
 Hello Pat:

 Do the Overhaul Just like the Automotive Overhaul. The Eaisest Way to get your Torque Specs is to Use the Standard Bolt Torque Guide. The Size of the Bolt/Stud Determines the Torque Requires. Go to this Addy http://www.zerofast.com/torque.htm and Scroll Down to the Torque Specification Chart. Watch Out on this Chart the /marks are 1's instead of /'s(ie. 114-20 is 1/4-20 ect). I have the Same Chart on my Wall but am Unable to Send or Receive Pictures and Diagrams. Use Lith Grease Always for Reassembly of Engines. Hope this Helps. Let me know what Happens, Please.

 Good Luck

 Respectfully

 John