Small Engines (Lawn Mowers, etc.): Briggs & Stratton 5.5hp throttle assembly, briggs stratton, throttle assembly

Question
Have a Toro model 20462, I believe I lost governor spring (part 262661), have no idea where it attaches - Toro manuals (on web)do not show this part. (website below)

Do you know of a website with a drawing, or instructions of exactly how to replace.

thanks!  Lugene Azar

https://homeownersolutions.toro.com/portal/server.pt?space=CommunityPage&cached=true&parentname=CommunityPage&parentid=1&in_hi_userid=77248&control=SetCommunity&CommunityID=221&PageID=230#productDetailsPage


Answer
 Hello Lugene:

 Follow the Throttle Control Cable to the Throttle Control Bracket on the Engine. Have Someone Move the Throttle. You will See Where the Spring will Attach at this Location. It Should Pull the Spring When the Other End is Attached. The other End Should go to the Governor Control Arm. However, I Really Require the Model Numbers Off of the Engine to Be for Certain if this is Your Mowers Type of Hookup. Hope this Helps. Let me know what Happens, Please.

 Good Luck

 Respectfully

 John