Small Engines (Lawn Mowers, etc.): murray mower drive belt, murray mower, hello tom

Question
i have a 1995 murray riding mower model 30575x14a with a 12hp briggs engine. The drive belt is slipping to the point it needs to be replaced, what steps do i have to take to change belt  

Answer
 Hello Tom:

 If it the Transmission Drive Belt, then Remove the Deck. You will then be able to see the Routing of the Belt. Make sure to either make a drawing of the Belt routing. This is so you dont forget how to Route it when you put the new Belt on. Hope this Helps.

 Good Luck

 Respectfully

 John