Small Engines (Lawn Mowers, etc.): valve adjustment GX-610 Honda, adjustment nut, valve adjustment

Question
Had to remove head for repair. Can you explain the easiest method for adjusting valves on Hondas GX-610 V-twin ?

            thanks for your help.

Answer
Hiya pauly-
I've no experience on these engines Pauly-

I know they're adjusted on the rocker arm stem.
You'd have to manually rotate the engine until you found the point where they valve to rocker clearance is maximum, for each valve.  Check it, and if it needed adjustment then loosen the lock nut (hold the adjustment nut) Then  set it as follows-cold-
intake- 0.15mm
exhaust- 0.20mm
Afterward, I'd rotate the engine manually couple turns and check them all again to verify my setting.
hope this helps!