Small Engines (Lawn Mowers, etc.): B&S Clutch replacement, starter clutch, briggs stratton

Question
Hello
How do I remove and replace the starter clutch assembly on a 3.5 HP Briggs&Stratton Model 92902, type 3304 01 engine? Thanks for any special tool part numbers I might need to get.

Answer
 Hello Ward

 They make a 2pc Tool set just for Removal of the Starter Clutch.
You have to hold the Flywheel while you Unscrew the Starter Clutch.  When I first started doing Small Engine Repair I made a Tool out of a piece of pipe that I Cut Slots into to Match the Ears on the Starter Clutch. the Flywheel can be held a Strap Wrench.  The Starter Clutch is Lossened by Turning it Counter Clockwise. Use a Pipe Wrench to Turn the Tool, if you made one yourself.  As always when doing Repairs.  Please Be Careful.

 Good Luck

 Respectfully

 John


 Good Luck

 Respectfully

 John