Small Engines (Lawn Mowers, etc.): murray lawn tractor deck installation, deck hangers, murray lawn tractor

Question
I purcahsed a 18 hp 48 inch deck murray tractor model 46904x92a.  It came with a blade and deck, but no manual.  I do not know how to put the deck on is there a prcedure to follow of directions, that are available, there are 3 washers, 5 hair pins, and one rod with a pin and washer on one end.  I appreciate your help, thanks.  

Answer
This is very difficult to explain but I'll give it a try.  The rod with the pin and washer connect to the front of the deck and a corrosponding hole on the front (under) mower chasis. Install the rod through the holes, then the washer and pin.  

Next, I would install the belt the mower engine pulley and connect the mower engagement rod.

Now mount the mower deck on the mower deck hangers.  The hangers are located on the sides of the mower; the hangers are nothing more than pins.  Just insert the pins through the holes in the deck, install the washers and then the pins.  That's it.

Let me know if this helps or if you have any other questions.
Eric