QuestionI have a 74 camaro with no tilt steering column.I try to turn the key but it only goes so far, is it easier to buy a new column or fix the actuator rod? If so what does it connect to at the bottom?
AnswerHi Alex:
Typically, when this happens it is because the lock cylinder has gone bad or the spring for the locking pin has broken and jammed. In either case the repair is MUCh simpler than replacing it with an unknown quality column.
We have recently uploaded some pdf & video instructions on our company website (for a small fee) to give you first hand viewing of how to remove, disassemble, and reassemble the tilt column you are talking about. They are broken down into step by step detailed instructions with pictures. Although the instructions are not for your exact car, the column is very similar to yours.
http://www.steeringcolumnservices.com/steering-column-repair-how-to-instructions
We have also uploaded exploded views of most columns as well (for free). Yours should be here:
http://www.steeringcolumnservices.com/exploded-views.php
I hope these instructions can help you. Lastly, if you need parts to repair this column simply locate the part and you can purchase it directly through the shopping cart. We stock just about everything you would need to repair your car properly.
Good luck
Doug
http://www.steeringcolumnservices.com/
