Steering Column Repair: loose tilt steering, tool trucks, pivot pins

Question
I have a 94 s-10 blazer with aloose tilt steering, i read your answer`s on it and was woundering, the pivot pins, are they pressed in or threaded in ( if threaded L or R hand thread ).My tilt is so bad that if i go on bumpy roads or try to back up and move the wheel out of aline it pops out of gear... the place`s i rent tools haven`t heard of the pivot pin puller.. Thats why i asked the earlier questions,,              Harry

Answer

Pivot Pin Puller Hi Harry:

The pins are pressed in.  You will need a pullet to remove them.  Here is a link to the tool we use.  You can buy these at many places (including Ebay & Snap-On tool trucks)
http://cgi.ebay.com/ebaymotors/Tilt-Steering-Pivot-Pin-Puller-for-GMC%2FChrysler...

Also, we have recently uploaded some videos on our website to give you first hand viewing of how to remove, disassemble, and reassemble the parts you are talking about.  

http://www.stolenandrecovered.com/video/index.php

I hope these videos help you.  If not, please contact me again for more information.
Lastly, if you need parts to repair this column simply fill out an order form on our "Contact Us / Order Parts" page and we will get back in touch with you personally

Good luck
Dou