Steering Column Repair: ignition switch connector view, bulkhead connector, fusebox

Question
I'm having trouble finding a wiring diagram for 86 s-10 p/u  ignition switch.I had a truck brought to me with 4cyl removed and a 2.8 to install.I have the harness out of the truck with the 2.8. I don't have any power at all on the ignition switch. I'm begining to think the harness might be a little different maybe i'll have to move some wires around.Do you have any good info on this  

Answer
Hello Larry,
I'm afraid I don't have a schematic on the two different engine electricals. I can tell you it probably isn't at the ingition switch end as the basic starting connections are the same wire for wire. I would check at the fusebox and bulkhead. I don't know how much of the harness you aquired, but it should include the bulkhead connector. You could always match colors from the old to the new.
Hope that helps.
Have a great day!
-Jay