Subaru Repair: Sarting Problem Continues- 1991 Loyale, neutral safety switch, shift lever

Question
I appologize if the question came across twice but I am still working this problem  I thought I replied with the following info:
*******

Ok, I have full 12+ into the ignition switch and 12+ out (Your were
right, B&Y wire) when I go to start.  I still do not have power to the
solenoid on the starter.  

What am I missing?  inhibit/neutral switch??

Please help

Answer
Hey Kurt
If you car is automatic transmission, the neutral safety switch is at the base of the shift lever.  Get to the wires in the switch, check your B&Y wire there, make sure its got 12+ in start position,this is your input, now check the Black/White wire for 12+ in start, this is your output to the starter.  If there is power on both wires check the wire leading to the starter.  If you have a manual transmission, I am sorry but my diagram is not specific, it does not show a neutral safety switch.  I am sure it has one though, get to your clutch pedal, and find the switch attached to it.  Check the B&Y wire for 12+ in start, the Black/White wire coming out of the switch should have 12+ in start, if both have power its the wire running to the starter.  Let me know, hope I could help!