Toyota Repair: fuel, 4x4 toyota, jumper wire

Question
Hi ted I have a 1992 4x4 toyota p/u. I was going out of my driveway and the engine just quit. It will spin over but wont crank. I checked the fuel pump in the tank and I do not have any fire going to it. But i put a hot wire to the pump and it will pump.What do you think the problem might be? The engine will also surge up and down with you when you run it a while when you come to a stop. What could this be also?

Answer
Locate the diagnostic check connector under the hood and put a jumper wire between the terminals B+ and FP, this will bypass the relays, if the wiring is ok the engine should start, let me know if it does. Use a testlight and make sure there is battery voltage at B+.