Toyota Repair: Torque specs 06 Camry 2.4L engine, cam bearings, side fender

Question
What are the torque specs for the head bolts and cams along with the tightening sequence of bolts looking at the front of the engine on the passenger side fender? Had zero compression on all cylinders, pulled the head to get it pressure tested and milled.

Answer
The headbolts are torqued to 58ft/lbs then an additional 90 degrees, the number one cam bearings to 22 ft/lbs and the rest to 8ft/lbs. Start in the middle and work towards the ends of the cylinder head, tighten all of the headbolts to 58 and then add 90 degrees to each bolt starting in the center.