Toyota Repair: 2005 Sequoia Limited, check tire pressure, pressure sensors

Question
Is there a campaign for the check tire pressure system? This system appears to be malfunctioning. I just replaced all 4 tires, and had the tire place replace the interior seals for the pressure sensors inside the wheels. All tire pressures are stable and proper level. This Sequoia historically would self-clear the indicator once the tire pressures were set proper...no longer. 38500 miles on the odometer...perfect timing, warranty expired.

Answer
If the tire warning light was not on before the tires were replaced then it's very possible that one or more of the sensors was damged when the tires were replaced, make sure all 5 tires have the correct pressures. I would recommend having the toyota dealer diagnose this, it requires the connection of the techstream scantool to read the sensor input from each tire, if a sensor is not reading it will show up on the computer, the sensor needs to be identified and then removed and replaced and the ID number input into the scantool and then the system is reinitialized.