Toyota Repair: 92 4 x 4 truck rotors, axle shaft, spindal

Question
I want to replace the rotors on my 92 pick up. I have removed the calipers and the manual locking face plate. I can see the spindal with abolt and washer in it . Where do I go from here.  

Answer
There are two very large nuts holding the bearing on, it takes a special socket to remove them, the socket is available at most autoparts stores. First remove the 12mm bolt from the end of the axle, remove the snap ring, if it has one, from the axle shaft then unstake the lock plate, it's bent over the outer and inner nut to prevent loosening of the nuts,staighten the bent over parts with a screwdriver then use the socket to remove the outer locknut, remove the lock plate and then remove the inner wheel bearing nut, the hub will then slide off.