Toyota Repair: 1987 Toyota 4x4 Truck Hydraulic clutch, toyota 4x4 truck, hydraulic clutch

Question
My master cylinder on the hydraulic clutch has gone out and I have replaced it with a new one. I bled out the lines and have fluid running though. The clutch pedal is still mushy and it will not engage. What should I do next?

Answer
Check the clutch release cylinder on the bell housing, peel the rubber dust cover back, see if any fluid is present, check the hydraulic flex hose on the right side of the firewall they are known to leak also, if neither one leaks try bleeding the air out of the system again, it's possible there is still air in it.