Toyota Repair: REPLACING WINDOW GLASS, phillips screw, vent window

Question
I HAVE A 92 CAMRY THAT SOMEBODY JUST BROKE THE REAR DRIVER SIDE VENT WINDOW. I HAVE THE NEW GLASS THAT I GOT FROM TOYOTA AND NOW I NEED TO KNOW HOW TO PUT IT IN. I HAVE REPLACED WINDOW REGULATORS IN THE CAR WHICH WAS RELATIVELY EASY BUT ON A WINDOW THAT DOESN'T MOVE I'M A LITTLE LESS SURE. I WILL REALLY APPRECIATE ANY HINTS OR INSTRUCTIONS YOU CAN GIVE. THANKS TED.

                 BOB


Answer
Remove the door panel,remove the glass channel for the roll up window and remove the window, remove the rear metal guide, peel back the rubber door seal at the top there is a small phillips screw that holds the top of the guide piece on, there is a 10mm bolt on the door that connects the bottom of the guide, remove the metal guide piece and what's left of the quarter window can be removed and the new one installed.