Triumph Repair: chassis spacers and washers, rubber washers, spacers

Question
Hi Howard,
I am re-bolting the tub onto the chassis of my '74 Spit, but am unsure which of the main bolts need the rubber washers, which need the metal spacers.  Have been unable to find this info online, any light you can shed would be great.
Thanks,
Eric

Answer
Hi Eric,
I don't remember which goes where but I do have a diagram showing them and you may be able to figure it out from the diagram. Take a look at Http://mg-tri-jag.net/SpitfireFrame1.jpg for the diagram and change the number from 1 to 2 and to 3 for an explanation of bolt position but it don't say anything about which is metal or rubber.
That's all I have on it. If the body and frame has not been sanded or dipped you may be able to see marks on the body and frame where the diagram shows to see any tell tail marks.
Howard