Chevrolet: 1996 Chevy Cavalier still wont fire, camshaft position sensor, crankshaft position sensor

Question
Roger,
 Thanks for your reply on 10/31. Here is more detail on when this started. I would be driving and the car would just shut off. It started back immediately but the ETS off light and the Check engine light would come on and stay on for different amounts of time. Sometimes the ABS light would come on also. I took it to an auto parts and their check showed the crankshaft position sensor and the camshaft position sensor were both bad. We undid the battery and replaced both parts at the same time. But the car will crank but doesn't seem to be getting any spark. They did as you suggested and redid parts but it did not help. ECM checks out good also. Whats left?

Answer
HI Karen;
         I was wondering are you getting any spark to the plugs ? also it could just be a bad map sensor too. and at times the computor might have to be re-set so it will know that there are new sensors in it.Was it on a computor as it will tell all that is wrong if the person knows how to do it,and read the codes that it will spit out.That will tell you what is wrong.
OK /  Roger