Ford: 1990 ford f150 trans pump cover removal, auto parts store, ford f150

Question
I had a horrific Trans leak and do to being short on cash i have removed the Trans pulled out the front seal and would like to see if the pump is bad.I have removed the pump cover bolts and don't know what size the two bolts are to remove the cover. Can you help? I've called the auto parts store and they have no clue. the Trans is the overdrive with a 21 bolt pan 4wd.... If it is easyer you can call me  jesse.. Thank fpr your time in advance...

Answer
Hello.


I am not too sure.

Any local transmission shop will have that info.

I would assume that it being newer. it is metric. Most likely 8mm to hold the cover down and 10 mm for the slide puller attachments.  Or if it is SAE then 3/8"

If there are numbers on the head of the bolts (ie: 8.8) it is metric.  SAE uses lines