QuestionQUESTION: i am building a 331 with forged internals on level 10 dss block with lower
and upper level main girdle i like to know if there is anyway to make my car
rev higher without fn the engine at list to 6500 rpm or little more because
mine goes to 5500 please help is there anything
ANSWER: is this going to be a fuel injection or carb.?
---------- FOLLOW-UP ----------
QUESTION: fuel injection
ANSWER: ok i need to know what cam are you using ,rods,heads ,upper and lower intake ,injectors,or have you not gotten these idem yet?
---------- FOLLOW-UP ----------
QUESTION: did not buy any cam rods heads, i do have eldelrock 5.0 head that i going to
port n polish upper n lower i have 30 pounds man it would rally mean a lot to
me i you could sugest a close to perfect combo for high rpm without fn up
my engine like i said before this car is not going to be an every day car
probably 3 times a week
Answer2 things i need to know what hp do you want and how much of a budget do you have?and then i will take it from there.So you need cyl heads? If so, what are the valve relief's in the pistons cut for? TFS Twisted wedge or Inline as is Edelbrock, Dart, Ford?
