4 Wheel Drive/SUVs: EFI to carb swap, smog equipment, 351w

Question
I have a 96 Bronco with a 302 auto trans, the motor needs replaced and I have a fresh .030 over 351W in a 85 truck that I don't drive. Can I install this carburated motor in the Bronco with a TPS on the carb and the tranny still shift? Right now the 85 motor has a 650cfm Holley and I've seen an article on installing a TPS on a carb for this swap but they were installing the trans and related wiring into a carburated truck were as I want to install a carburated motor into an allready set-up EFI truck. This is a budget swap so I didn't want the expense of getting an EFI intake and computer unless absolutly necessary. Where I live, I do not have to worry about smog equipment because it's fo farm use.

Answer
Eric,

it is possible to make it work, of course the "Check engine" light will be on but if it isn't for road use it won't matter. I'm not sure on how to attach the TPS to the carb but I'm sure it can be done. Transmission will bolt right up and you should be able to do it just fine if you take your time

Matt