Suzuki: Relacing threaded wheel studs, suzuki vitara jx, 1999 suzuki vitara

Question
Can you give me a step-by-step walk through on how to replace the front wheel studs on a 1999 Suzuki Vitara JX(4cyl, 2.0L, 4wd)?

Answer
I would have to see the vehicle to be absolutely accurate, but this is the general method:
1) Drive the old stud out with either a specialized press tool, or a punch and hammer.
2) drive the stud in partially with a hammer, and then with selected spacers ( or a specialized tool) tighten a threaded substitute for a lug nut to completely pull the stud into place, being cautious not to exceed the wheel tightening torque.